MooseSSD部署

## 准备主机:
```
master：
192.168.1.246 , MfsSSDMaster,320
Metadata:
192.168.1.220 ,MfsSSDMeta ,127
ChunkServer:

```

PVE2 ：下线：

PVE2:9422:/disks/d59302_1/
/dev/sdb1

---------------------------------
PVE2:9422:/disks/d1/ sdd

/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/host4/target4:0:0/4:0:0:0/block/sdd

PVE2:9422:/disks/d11878_2/  sdb

wwn-0x50014ee6051b73ef
/devices/pci0000:00/0000:00:1f.2/ata2/host1/target1:0:0/1:0:0:0/block/sdb

PVE2:9422:/disks/d2/ sdf

usb-USB3.0_Super_Speed_DD564198838B0-0:0
/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/block/sdf

---------------------------------
1.停止moosefs-chunkserver
2.取消/etc/fstab
3 取消/etc/mfs/mfshdd
4直通硬件
5在fastchunk2内设置

转移到: 
fastchunk2 192.168.1.236

qm set 303 --sata2 /dev/disk/by-id/wwn-0x50014ee6051b73ef

mkdir /disks/d1
mkdir /disks/d2
mkdir /disks/d11878_2

添加: /etc/mfs/mfshdd.cfg
/disks/d1
/disks/d2
/disks/d11878_2

需添加:/etc/fstab
UUID=6d47d93a-745b-4e9e-865a-80287299a45d /disks/d1 ext4 defaults 0 0
UUID=c4d78e32-a412-424b-a631-4f8d48ba4fc7 /disks/d2 ext4 defaults 0 0
UUID=57ff501d-2459-4978-a7a6-48e4bb1473ae /disks/d11878_2 ext4 defaults 0 0